Safety caps SIK 10, 20, 30

In the rail track superstructure the safety caps are installed under the sleepers and increase the lateral sliding of the the tracks. We offer safety caps for concrete, wooden and steel sleepers.
Please contact us if you have any special requests. We are happy to sending you an individual offer!
- Manufacturing type of safety cap: hot-bent
- The hot-bent parts consist of
- 1 angle plate with two welded nuts
- 2 hexagon head srews M24x140mm, 200mm, 240mm
- 1 flat spring
- Manufacturing after DB standard or according to customer requirements
We offer different versions of our safety cap. Further variants are available on request.
Contact us! We are happy to advise you.
- Rail track superstructure
- Switch construction
- Concrete sleepers
- Wooden sleepers
- Steel sleepers
We have different sizes and versions of our safety caps on stock. Other variants can be produced quickly thanks to the close contact to our suppliers. In addition to the versions listed below, we also offer many products with a hot-dip galvanised finishing. If you have any further questions or special product requests, please contact our customer service by phone, e-mail or via the contact form below.
Variants of safety caps:
Safety cap type SIK 10 for wooden sleepers 15×26 |
Safety cap type SIK 20 for concrete sleepers 15×26 |
Safety cap type SIK 30 for steel sleepers 15×26 |
Contact form
Do you have any questions about our company or are you interested in our products? We would be pleased to advise you personally.